

Coilover kit for Abarth 500/595/695 2007->
BR series type RN (no camber plates)
Height, spring pre-load and damping adjustments
Delivery time between 5 and 25 days
Coilover kit for Abarth 500/595/695 (2007-).
The standard kit comes with spring rates of 5 kg/mm front and 5 kg/mm rear and it's recommended for trackday use.
The BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.
This kit is ideal if you use the car both on the track / mountain and for long journeys. The hydraulics that can be set to 30 clicks allow you to adjust the hardness of the shock absorbers and the behavior of the car as desired
The hardness of the springs is a good compromise between comfort and performance.
It is mounted on original rubber topmounts but thanks to the slots on the shock absorber body it is possible to adjust the front camber up to 2.2º.
On request, it is possible to purchase the kit with different front spring rate.
On request it is possible to purchase the Extra Low kit (for stance cars).
Available stainless steel centering collar for rear axle and front subframe. These bushings, identical to those fitted on the Assetto Corse, allow the rear axle and the front subframe to be centered with the vehicle chassis.
For configuration, availability, delivery times and other information:
tel/Whatsapp: +39 331 9622326
Mail: info@gardustech.com