Braid Full Race B Dakar wheels

Braid is a leading company in the production of motorsport wheels based in Spain.

The Braid Fullrace B Dakar alloy wheels are designed for buggies, light offroad prototypes and SSV's that mount 14" and 15" tires (FIA T3 & T4 category).

Made with Full Flowcast Technology. This Technology, first in BRAID, allows a suitable arrangement of the aluminium alloy structure and granulometry so that it greatly increases its mechanical characteristics. The result is a lighter wheel, more resistant, and much higher capacity of deformation at very strong impact, avoiding wheel cracks.

With the tyre non-rotation system and tyre retaining system included as standard, running with low pressures will not be a problem.

Weight starting from 5.9Kg (14x7) and 6.3Kg (15x7).

The available sizes and finishes are shown in the drop-down menu on the side.

Customizable ET and PCD and Bore. Taper 60° bolt inserts.

The Braid Fullrace B Dakar wheels are available in the standard glossy anthracite color, customization with another classic color adds €330 VAT included to the base cost.

Classic colors:

With a further surcharge it is possible to create unique colors by providing the RAL code and choosing the type of finish (glossy, satin or matt), here are some examples:

Braids are motorsport wheels and are not designed to be used with hubcaps. If you want to use hubcaps, you must request the optional machining. Machining + hubcaps cost €60 (for small car hubcaps) or €95 (for large off-road hubcaps) VAT included.

Available optionals:

• Hub and/or spokes machining for weight reduction
• Special center-lock mechanization
• Special center-lock for Porsche (metallic washer included)
• Single nut (center-lock) conversion kit for original hubs
• Twin/Double PCD
• Special ET
• 4x Ford Gr. A washers
• Road car mounting kit (depending on the vehicle composed of: centercap (1248, C090, C156), nuts or bolts, plastic or aluminum centering rings, spacers)
• Road car mounting kit (depending on the vehicle composed of: centercap (6 holes, 5 holes, M869, PCH25), nuts or bolts, plastic or aluminum centering rings, spacers)
• Tyre retaining with special hump

It's also possible to have the cross section drawing to check for brake clearance. For example:

For configuration, availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com