Braid Full Race C wheels

Braid is a leading company in the production of motorsport wheels based in Spain.

The Braid Fullrace C alloy wheels are specially designed and produced for Circuit and Hillclimbing ONLY, for vehicles up to 1300Kg in running condition (fuel and driver).

The inner profile is optimised to accommodate large brakes while the clean multi-spoke line ensure lightness, strength and durability.

Made with Full Flowcast Technology. This Technology, first in BRAID, allows a suitable arrangement of the aluminium alloy structure and granulometry so that it greatly increases its mechanical characteristics. The result is a lighter wheel, more resistant, and much higher capacity of deformation at very strong impact, avoiding wheel cracks.

Thanks to this technology, the weight of these wheels starts at only 6Kgs, while providing the structural stability and strength needed for the light circuit vehicles.

The spokes don't protrude out of the edge, avoiding the common collision problem with contiguous wheel during high speed race battle in the circuit.

The available sizes and finishes are shown in the drop-down menu on the side.

Customizable ET and PCD and Bore. Taper 60° bolt inserts.

The Braid Fullrace C wheels are available in the standard glossy anthracite color, customization with another classic color adds €330 VAT included to the base cost.

Classic colors:

With a further surcharge it is possible to create unique colors by providing the RAL code and choosing the type of finish (glossy, satin or matt), here are some examples:

Braids are motorsport wheels and are not designed to be used with hubcaps. If you want to use hubcaps, you must request the optional machining. Machining + hubcaps cost €60 VAT included.

Available optionals:

• Hub and/or spokes machining for weight reduction
• Special center-lock mechanization
• Special center-lock for Porsche (metallic washer included)
• Single nut (center-lock) conversion kit for original hubs
• Twin/Double PCD
• 4x Ford Gr. A washers
• Road car mounting kit (depending on the vehicle composed of: centercap (1248, C090, C156), nuts or bolts, plastic or aluminum centering rings, spacers)
• TCT version. TCT is a unique manufacturing technique to instantly manufacture these wheels in any special width, without extra tooling nor large orders. If you choose this option it is possible to have the wheels with or without a lip (deep dish).

It's also possible to have the cross section drawing to check for brake clearance. For example:

For configuration, availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com