Braid Full Race AC FF Flowformed wheels

Braid is a leading company in the production of motorsport wheels based in Spain.

The Braid Fullrace AC FF alloy wheels are designed for tarmac and rally racing.

The inner profile is optimised to accommodate large brakes while the clean multi-spoke line ensure lightness, strength and durability.

Manufactured with Spin-Forging technology (Flowforming) using the highest aluminium grades. This process stretches and compresses the aluminium alloy, increasing tensile strength, resulting in a cast wheel with properties near to those found in a forged wheel. The final wheel is lighter, stronger, with improved elongation to absorb greater impacts without breaking, as well as an increased load capacity over regular cast wheels.

Assisted by a design software, Braid was able to reproduce concave spokes while optimizing the inner profile to accommodate large brakes.

The available sizes and finishes are shown in the drop-down menu on the side.

Customizable ET and PCD and Bore. Taper 60° bolt inserts.

The Braid Fullrace AC FF wheels are available in the standard glossy white color, customization with another classic color adds €330 VAT included to the base cost.

Classic colors:

With a further surcharge it is possible to create unique colors by providing the RAL code and choosing the type of finish (glossy, satin or matt), here are some examples:

Braids are motorsport wheels and are not designed to be used with hubcaps. If you want to use hubcaps, you must request the optional machining. Machining + hubcaps cost €60 VAT included.

Available optionals:

• Hub and/or spokes machining for weight reduction
• Special center-lock mechanization
• Special center-lock for Porsche (metallic washer included)
• Single nut (center-lock) conversion kit for original hubs
• Twin/Double PCD
• 4x Ford Gr. A washers
• Road car mounting kit (depending on the vehicle composed of: centercap (1248, C090, C156), nuts or bolts, plastic or aluminum centering rings, spacers)
• TCT version (NON Flow Formed). TCT is a unique manufacturing technique to instantly manufacture these wheels in any special width, without extra tooling nor large orders.

It's also possible to have the cross section drawing to check for brake clearance. For example:

For configuration, availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com