Braid Full Race T Beadlock A wheels

Braid is a leading company in the production of motorsport wheels based in Spain.

Derived from Fullrace T, the Fullrace T Beadlock A is a unique wheel that can be used to battle your way in to winning championships or just for your next off-road adventure. It is a highly recommended wheel for harsh terrains in any type of buggies or mid-sized offroad vehicles.

Made with Beadlock A System. This system consists of a 6061-T6 aluminium outer ring bolted to the wheel that clamps the outer bead of the tyre and holds it in place allowing running extremely low pressures.

Although the inner bead is not as critical as the outer bead, the system also incorporates a special 90° machined hump profile on the inner part of the wheel, as well as an anti-rotational tyre system.

Made with Full Flowcast Technology. This Technology, first in BRAID, allows a suitable arrangement of the aluminium alloy structure and granulometry so that it greatly increases its mechanical characteristics. The result is a lighter wheel, more resistant, and much higher capacity of deformation at very strong impact, avoiding wheel cracks.

The available sizes and finishes are shown in the drop-down menu on the side.

Customizable ET and PCD and Bore. Taper 60° bolt inserts.

Braid Fullrace T Beadlock A wheels are available in any standard color at no extra charge. Possibility of having wheel and beadlock ring of different colors - red beadock ring available.

Classic colors:

With a further surcharge it is possible to create unique colors by providing the RAL code and choosing the type of finish (glossy, satin or matt), here are some examples:

Braids are motorsport wheels and are not designed to be used with hubcaps. If you want to use hubcaps, you must request the optional machining. Machining + hubcaps cost €60 (for small car hubcaps) or €95 (for large off-road hubcaps) VAT included.

Available optionals:

• Hub and/or spokes machining for weight reduction
• Special center-lock mechanization
• Special center-lock for Porsche (metallic washer included)
• Single nut (center-lock) conversion kit for original hubs
• Twin/Double PCD
• Special ET
• 4x Ford Gr. A washers
• Road car mounting kit (depending on the vehicle composed of: centercap (1248, C090, C156), nuts or bolts, plastic or aluminum centering rings, spacers)
• Road car mounting kit (depending on the vehicle composed of: centercap (6 holes, 5 holes, M869, PCH25), nuts or bolts, plastic or aluminum centering rings, spacers)
• Non rotation system (grooved bead seat)
• Tyre retaining with special hump

It's also possible to have the cross section drawing to check for brake clearance. For example:

For configuration, availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com