Braid Win Race S Beadlock B wheels

Braid is a leading company in the production of motorsport wheels based in Spain.

Derived from Winrace S, the Winrace S Beadlock B can be used in any type of mid-sized offroad vehicles.

Made with Beadlock B System. This system is made up of several pointed screws screwed to the outer flange of the wheel whose objective is to prevent the tyre from rotating against the wheel and at the same time prevent the outer bead of the tyre from unseating. It is a simple but effective system that allows running with a minimum pressure of 1 bar / 14.5 psi.

Made with Full Flowcast Technology. This Technology, first in BRAID, allows a suitable arrangement of the aluminium alloy structure and granulometry so that it greatly increases its mechanical characteristics. The result is a lighter wheel, more resistant, and much higher capacity of deformation at very strong impact, avoiding wheel cracks.

With its great features, including a 90° machined hump and grooved bead seat, is the perfect wheel for off-road racers or adventure minded tuners.

The available sizes and finishes are shown in the drop-down menu on the side.

Customizable ET and PCD and Bore. Taper 60° bolt inserts.

Braid Winrace S Beadlock B wheels are available in any standard color at no extra charge. Possibility of having wheel and beadlock ring of different colors - red beadock ring available.

Classic colors:

With a further surcharge it is possible to create unique colors by providing the RAL code and choosing the type of finish (glossy, satin or matt), here are some examples:

Braids are motorsport wheels and are not designed to be used with hubcaps. If you want to use hubcaps, you must request the optional machining. Machining + hubcaps cost €60 (for small car hubcaps) or €95 (for large off-road hubcaps) VAT included.

Available optionals:

• Hub and/or spokes machining for weight reduction
• Special center-lock mechanization
• Special center-lock for Porsche (metallic washer included)
• Single nut (center-lock) conversion kit for original hubs
• Twin/Double PCD
• Special ET
• 4x Ford Gr. A washers
• Road car mounting kit (depending on the vehicle composed of: centercap (1248, C090, C156), nuts or bolts, plastic or aluminum centering rings, spacers)
• Road car mounting kit (depending on the vehicle composed of: centercap (6 holes, 5 holes, M869, PCH25), nuts or bolts, plastic or aluminum centering rings, spacers)
• Non rotation system (grooved bead seat)
• Tyre retaining with special hump

It's also possible to have the cross section drawing to check for brake clearance. For example:

For configuration, availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com