Audi B9 RS5 - Valvetronic FI Exhaust

FI Exhaust for Audi B9 RS5 2.9TFSI V6 (2017-) Fi Exhaust (Frequency Intelligent Exhaust) high-performance valvetronic exhaust system is direct replacement bolt on system manufactured out of a high-grade T304 stainless steel that offers an exhilarating soundtrack.

The Fi EXHAUST system is designed with a valvetronic technology to control airflow, sound volume and enhance the overall performance and torque. On average horsepower is expected to increase from 5-10% after installing a full catless system, which includes a valvetronic catback and ultra-high flow downpipe.

When valves are closed exhaust gasses are routed through the muffler resulting in a low-profile comfortable drive. However, when the valves are fully open an intense and sporty soundtrack is produced.

Switching between street and race sound profiles can be done using factory exhaust/sport button or drive mode, or optional Fi EXHAUST remote control and mobile App.

The unique sound and performance for Audi B9 RS5 is achieved through individually designed muffler internals that are fabricated to offer an ultimate driving experience.

Please note each part of the Fi EXHAUST system needs to be ordered separately.
Different exhaust parts are offered depending on the vehicle version.

Please note that the actual product may vary in appearance depending on the year of the car and area. The exhaust system is also subject to changes to the design over an extended time period. Product pictures are for illustration purposes only.

Pipe diameter: 76mm

Downpipe weight: 5.08Kg

Catback Exhaust:

• Front Pipe + Mid Y-Pipe + Valvetronic Muffler + Dual Silver Tips (Compatible with OEM Elect. Valve - No Remote Control Included)  (AD-RS4B9-CBOE + TIP-RS4-S + CAB-BTB*2)

Downpipes (Optional):

• Catless Downpipe (AD-RS4B9-NCAT)
• Catless Downpipe Ceramic Coating Service Cost (Gold) (AD-RS4B9-NCATCRG)
• Sport 200 Cell Downpipe (AD-RS4B9-CAT200)

Tips (Optional):

• Dual Tips in Matte Black (TIP-RS4-MB)

VALVE

All Fi EXHAUST exhaust systems are equipped with valvetronic technology. This technology is not only used to control sound volume, but also enhance overall performance of the vehicle. Before the inception of this technology, horsepower and torque were irreconcilable contradictions in the design of exhaust systems. This allowed sports cars to have high torque power at low rev speeds and even higher horsepower capability at high rev speeds.

DOWNPIPE (optional)

Catless Standard Version

The ultra-high flow catless downpipes remove restrictive factory catalytic convertor. They increase exhaust gas flow and performance gains, produce higher sound volume. And is usually recommended option going further with ECU tuning.

Catless Sensor Version

The ultra-high flow catless downpipes remove restrictive factory catalytic convertor. They increase exhaust gas flow and performance gains, produce higher sound volume. The downpipe is also equipped with a dummy oxygen sensor to reduce a chance of the check engine light (CEL) being triggered.

Sport 200Cell

With the larger cells and fast exhaust flow rate, it is smooth, durable and do not have refractory wool burn-out problems. The higher the number of the cells, the smaller and denser the hole is. The higher the back pressure, the more it can enhance torque performance, while the opposite is true for increasing horsepower.Converting your stock catalyst converter (400~800 CPSI) into our metallic catalyst converters will result in significant enhancements in airflow discharge that circumvents the limitations and parameters set by car manufacturers.

REMOTE CONTROL

Compatibility with OEM sport button/mode.

The intelligent valve functionality can be controlled using OEM sport button/mode to switch between valves ON/OFF and regulate desired sound volume. FI EXHAUST remote control is not needed and is an optional upgrade to have more control over exhaust valve behavior.

TIPS:

Stainless with polish (standard):

Matte Black (optional):

Matte Black tips are pure and elegant and a surface is without a shine. Each tip is engraved with Fi EXHAUST logo.

OPTIONAL GOLD CERAMIC COATING

The gold ceramic coating protects from corrosion, reduces heat exposure to heat sensitive components in the engine bay and keeps temperature low. It’s a great way to improve longevity of the exhaust and other components prone to thermal degradation like wiring. In addition avoid discoloration after extended use and enjoy the lasting look of the exhaust that will never go out of style.

OPTIONAL CERAMIC COATING

Fi EXHAUST eliminates traditional thermal insulation materials that contain toxic substances, and directly coats the exhaust pipe with a nano-ceramic coating to protect from corrosion, reduce heat exposure to heat sensitive components in the engine bay and keeps temperature low. It’s a great way to improve longevity of the exhaust and other components prone to thermal degradation like wiring.

For more information, to know availability and delivery times contact us:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com