Solid Billet Multi-angle Thermostatic Oil Filter Sandwich Plate HEL Performance

Solid Billet Thermostatic Oil Filter Sandwich Plate HEL Performance.

The HEL Performance multi-angle solid billet oil filter sandwich plate comes with a built-in thermostat, which prevents the flow of oil to the cooler until the engine oil reaches the desired temperature. This allows for both a faster warmup and also extra protection in cold environments over a non-thermostatic sandwich plate. If your oil temperature dips the thermostat will close again enabling your oil to stay at its optimum temperature.

Approximately 10% of the oil is in constant circulation through the oil cooler at all times, maintaining a consistent flow that serves two crucial purposes: to prevent the formation of air pockets and to act as a protective shield against thermal shock to the system.

Due to the clever multi-angle configuration, you can have the oil cooler hoses coming out straight or at a 45 degree angle, useful for when engine space is tight and there isn't much room to route the oil lines.

You can attach both oil temperature and oil pressure sensors using 1/8" NPT, M10 or M12 sensor port adapters (optional). If you prefer not to use the sensor ports, we include blanking plugs as standard.

Machined from 6082-T6 solid billet aluminium in-house at HEL's United Kingdom headquarters and finished in a hard-wearing anodised grey.

Thermostat opening selectable from the drop-down menu.

Central bolt thread selectable from the drop-down menu.

M22 x 1.5 inlet and outlet ports. Possibility of using -8 AN, -10 AN or -12 AN adapters (Male to Male). Adapters selectable from the drop-down menu.

1/8" NPT, M10 or M12 optional sensor port adapters selectable from the drop-down menu.

Made in the UK.

Includes thermostat valve? Yes

Thermostat temperature: 82°C, 92°C, 102°C

Port angle: 2x Straight, 2x 45°

Lenght (excl. adapters): 103mm

Width (widest point, incl. thermostat cap): 78.4mm

Thickness (excl. o-Ring): 32mm

Weight (excl. adapters): 328g

Min. oil filter o-ring diameter: 52mm

Max. oil filter o-ring diameter: 75mm

Inlet/outlet port thread: M22x1.5

Centre bolt thread: M20 x 1.5 or 3/4"-16 UNF

O-ring material: nitrile

Colour: "HEL" grey

Finish: hard anodised

Material: 6082-T6 aluminium

Made in the UK.

For availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com