Universal Oil Filter Relocation Kit HEL Performance

Universal Oil Filter Relocation Kit HEL Performance.

The HEL Performance universal oil filter relocation kit is an excellent solution for moving and relocating the engine oil filter when space is limited; for example on an engine swap or to facilitate the installation of an oil cooler.

Both plates in this kit (relocator remote head and take-off) are of the highest quality: they are machined from a solid block of 6082-T6 billet aluminum and then sandblasted and anodized. The HEL logo engraved on the plates is painted red by color injection.

The relocator remote head is available with M20x1.5 or 3/4"-16 UNF center bolt and with -8 AN JIC or -10 AN JIC outlet fittings.

There are 4 ports on the relocator remote head. This means it can be fed and returned solely on either the left or right side, or you can run your hoses transversely across the head. The two free holes are closed using M22 x 1.5 plugs or they can house 1/8" NTP adapters for installing oil sensors. The relocator remote head is available with an M20x1.5 or 3/4"-16 UNF center bolt and with -8 AN JIC or -10 AN JIC outlet fittings and is compatible with most oil filters with outside diameters from 56mm to 72mm. The relocator remote head can be anchored to the car using the three holes present.

AN HEL fittings machined from billet. Different sizes available.

Oil lines available in both black and silver.

Made in the UK.

For availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com