Solid Billet In-line Oil Thermostat HEL Performance

Solid Billet In-line Oil Thermostat HEL Performance.

Machined from 6082-T6 Billet Aluminium in-house at HEL's United Kingdom headquarters. Assembled and inspected by hand and finished with a paint infilled HEL logo.

The oil thermostat has been designed to be fitted to oil lines that run to and from an external oil cooler. This is an ideal solution for vehicles that use an oil take-off plate as opposed to a conventional oil filter sandwich plate.

The thermostat allows engine oil to by-pass the oil cooler until the oil reaches the desired temperature. This allows for both a faster warmup and also extra protection in cold environments over a non-thermostatic sandwich plate. If your oil temperature dips the thermostat will close again enabling your oil to stay at its optimum temperature.

Approximately 10% of the oil is in constant circulation through the oil cooler at all times, maintaining a consistent flow that serves two crucial purposes: to prevent the formation of air pockets and to act as a protective shield against thermal shock to the system.

Thermostat opening selectable from the drop-down menu.

M22x1.5 AN inlet and outlet ports. Possibility of using -8 AN, -10 AN or -12 AN adapters (Male to Male). Adapters selectable from the drop-down menu.

Includes thermostatic Valve? Yes

Thermostat temperature: 82°C, 92°C  or 102°C

Length (Incl. thermostat cap): 92mm

Width (excl. adapters): 75mm

Thickness: 32mm

Weight (excl. adapters): 289g

Integrated sensor port? Yes

Sensor port thread: 1/8" NPT

Mounting hole size (2): 6.5mm x 11.9mm

Inlet/outlet port thread: M22x1.5

Fluid compatibility: Engine Oil, Transmission Oil, Driveline Fluid

Colour: "HEL" grey

Finish: Hard Anodised

Material: 6082-T6 Aluminium

Made in the UK

For availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com