Solid Billet Oil Filter Relocation Remote Head HEL Performance
search
  • Solid Billet Oil Filter Relocation Remote Head HEL Performance
  • Solid Billet Oil Filter Relocation Remote Head HEL Performance

Solid Billet Oil Filter Relocation Remote Head HEL Performance

Solid Billet Oil Filter Relocation Remote Head HEL Performance.

The ideal solution to relocate your oil filter due to lack of space.

Possibility of using -8 AN or -10 AN (male-male) fittings. Fittings selectable from the drop-down menu.

Adapters for oil sensors selectable from the drop-down menu.

Center bolt thread selectable from the drop-down menu.

Made in the UK.

Center Bolt Thread: M20 x 1.5
Inlet and Outlet Adapters: -8 AN JIC
Sensor Port Adapters: No Adapters - Sensor Port Blanking Plugs with O-Rings
Quantity

Solid Billet Oil Filter Relocation Remote Head HEL Performance.

 

HEL Performance's Billet Oil Filter Relocator Plate is a great solution for moving and relocating your engine oil filter due to lack of space; for example on an engine swap or to facilitate the installation of an oil cooler.

This Remote Head is of the highest quality: it is machined from a block of 6082-T6 billet aluminum and is sandblasted and anodized. The engraved HEL logo is painted red by color injection.

On this Remote Head there are 4 ports. This means it can be fed and returned solely on either the left or right side, or you can run your hoses transversely across the head.

The two free holes are closed using M22 x 1.5 plugs or they can house (optional) 1/8" NTP adapters for installing oil sensors.

This Remote Head is available with M20x1.5 or 3/4"-16 UNF center fitting and -8AN JIC or -10 AN JIC outlet fittings and is compatible with most oil filters with outside diameters from 56mm to 72mm.

Anchorable to the car through the three holes present.

 

Made in the UK.

 

For availability, delivery times and other information:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com

HEL-RFH
New